Aspire Atlantis v2.0 Sub Ohm Tank
Atlantis v2.0 by Aspire is the upgraded version of the popular Atlantis. This innovative tank system brings new improvements such as an improved adjustable airflow which allows the air to flow more easily and conveniently.
The Atlantis v2.0 features a larger 3ml capacity compared to the original 2ml capacity of the Atlantis. The Atlantis 2.0 features a new cooling system located at the top of the tank which allows you to adjust the temperature of vapor by rotating the valve to control the amount of external air. The Atlantis 2.0 also features a large stainless round drip which provides a RDA-like experience.
The Atlantis v2.0 features new sub-ohm 100% organic cotton coils that help vapers experience a purer taste and bigger clouds than the previous model. 1.0ohm, 0.5ohm, and 0.3 ohm coils are all available for Atlantis 2.0.
Features and Specs:
- Dimensions: 2"L x 7/8"D (without drip tip)
- 22mm Diameter
- 510 threaded
- Capacity: 3ml
- Replaceable glass tank
- Stainless steel construction
- Patented Aspire BVC Technology
- 100% Organic cotton
- Wire made in the USA
- Available resistances: 0.3ohm, 0.5ohm and 1.0ohm
- Upgraded adjustable airflow
- New cooling system
Risk of battery Explosion! Ni 200 is designed for use only with devices equipped with circuit boards capable of controlling coil temperature. Do not use this product with any other devices.
Warning: This tank uses a sub-ohm resistance atomizer. It will only work on a mechanical mod or a mod capable of firing an atomizer of 0.5ohm or lower.
You must be sure that your mod AND batteries can handle SUB OHM coils.
If you're using a regulated mod, make sure it can handle the amps. For
mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe!
Tip for new users: We strongly suggest 6mg eLiquid or lower
with this atomizer. Sub-ohm atomizers produce higher throat hit than
low and standard resistance atomizers. Using this atomizer with a
nicotine level above 6mg will usually taste burnt or harsh.
- The metal tube
in the center of this Clearomizer leads from the mouthpiece to the
battery end. Avoid getting liquid in this tube when filling the
- When unfastening the base
(atomizer head) to refill the Clearomizer, the seals are temporarily
broken and liquid will leak from the mouthpiece or escape into the
center tube. Always wrap a cloth or piece of tissue around the
mouthpiece when unfastening the base of the Clearomizer.
noise or leaks: This is a sign that liquid has found its way into the
metal tube in the center of the Clearomizer (and usually occurs after a
refill). Ridding the center tube of liquid will resolve the issue. To do
so without emptying the tank, remove the Clearomizer from the battery,
wrap a cloth or tissue around the battery end of the Clearomizer and
blow through the mouthpiece.
- The atomizer
head of the Protank can unfasten when unscrewing the tube or base. Always
secure the atomizer head before reinstalling the base of the Protank.
is normal to find a small amount of liquid in the battery contact area
when removing the Clearomizer or any atomizer. We recommend cleaning the
battery before charging it.
- When possible,
keep the tank full and never below 1/3 full of eLiquid ("topped off").
This helps maintain the "vacuum" in the tank and prevent leaks.
- Atomizer heads have an average lifespan between 10 to
20 days. When the atomizer head wears down, it may begin to leak.
Replace the atomizer head with a new one if available.
Please Note: This product is not covered by warranty and cannot be exchanged.